RT ENLACE SOFT IP

La formás más económica de enlazar usando internet. Envia audio a tiempo real. Le ofrece la posibilidad de conectar varias emisoras a la vez, para montar cadenas.

PARA CONSULTAR TODOS LOS DETALLES PULSE AQUI

 

 

ENLACE 1.6 Ghz emisor + receptor

GENERAL SPECIFICATIONS

Mains Voltage Range 115 / 230 Vac (+10% -25%)
Battery Backup 24.0÷28.0V - 1.2A @ 24 V
Size 19" 1U std. Rack.
Antenna connector N / 50 ohm
Monitor Connectors BNC
I/O Lines No field

RADIO FREQUENCY

Frequency range 1.4-2.6GHz.
Bands 1429÷1433MHz
1517÷1525MHz
1660÷1670MHz
1700÷1730MHz
1785÷1825MHz
2367.5÷2372.5MHz
2440÷2.450MHz
2468.1÷2483.3MHz
Modulation FM 75 kHz peak dev. 180k F3E mono, 256kF3E stereo
Frequency step size 100 kHz
Long term frequency error <1 ppm/year
 RF harmonic products <-60 dBc, -80 dBc typ.
RF spurious products <-70 dBc, -80 dBc typ.
Dynamic Selectivity >+10dB typ @ ΔF=300 kHz
>+35dB typ @ ΔF=500 kHz
>+45dB typ @ ΔF=1.0 MHz
RF Input Level -90 ÷ -10dBm (7μV÷70mV)
Typical Sensivity (S/N=60dB) Sin= -90dBm (7μV) mono
Sin= -70dBm (70μV) stereo

AUDIO CHARACTERISTICS

Mpx/mono Output Level -1.5÷+12dBm (0.5dB steps)
S/N Ratio (30÷20000Hz rms) >70 dB, 76 typ. Mono
>66 dB, 72 typ. Stereo
Modulation Distortion
@1kHz/ 00%dev. Mono≤0.1% (0.03% typ)
Stereo, 1ch≤0.30% (0.20% typ)
Stereo Cross-Talk >50dB(100÷5000Hz)
>45dB(30÷15000Hz)
Mpx Input Audio Level -3.5 ÷ +12.5dBm @ ± 75kHz dev.
Auxiliary Channel Input Level -12.5÷+3.5dBm@±7.5kHzdev.
MPX Monitor Output Level 0 ÷ +10 dBm @ ±75kHz dev.
Preemphasis 0/50/75 μs ±2%
Audio Frequency Response 30 Hz ÷ 15 kHz ±0.1dB

 

ENLACE 5.8 GHZ audio + video (emisor + receptor + antenas)

 

Sistema profesional a 5.8 Ghz, le evita los problemas de interferencias en frecuencias de 2.4 ghz

Transmite 2 canales de audio + 1 canal video

Cobertura varios kms según condiciones (altura...)

incluye:

1x Receptor
1x Transmisor
2x 27dB gain antenas, trípodes no inlcluidos
2x fuentes alimentación
1x Installation manual

(Cajas externas no incluidas)
 

Technical specifications for transmitter:
- Input Voltage: DC 12-15V
- Current Consumption: < 400mA
- Output power @ connector: +30dBm
- Modulation Type: FM
- RF Deviation FM: 6.4MHz peak to peak
 - Channel Frequency: 16
 - Frequency Selection: Dip Switch 
- Frequency Stability: ±250KHz
- Output Flatness: 0 ~ +3dB
- Video Input Level 1V peak to peak
- Impedance: 75ohms
- Pre-Emphasis: NTSC & PAL
- D.G. < ±8%
- D.P. < ±8%
- Audio Input Level: 2V peak to peak
- Impedance 600 ohms
- Audio Carrier Frequency CH1 - 6.0MHz ±25KHz
- Audio Carrier Frequency CH2 - 6.5MHz ±25KHz
- Audio Distortion 3% max. THD


Technical specifications for receiver:
- Input Voltage: DC 12V ± 10 %
- Current Consumption: < 220mA
- Channel Frequency Matches Transmitter
- Input Level @ connector: -25 ~ -80dBm
- IF Frequency: 479.5MHz
- IF Bandwidth 18MHz
- Gain Flatness 3dB max
- Noise Figure 2dB Typical
- Input Return Loss 7dB Typical
- LO. Drift ±250KHz
- LO. Leakage -50dBm max.
- Image Rejection 40dB
- Output Level 1V ±0.15Vp-p Load.
- Impedance 75 ohms
- De-Emphasis NTSC & PAL
- D.G. < ±8%
- D.P. < ±8%
- Video S/N Ratio 38dB min.
- Audio Output Level: 1.4Vp-p ±0.2
- Impedance 600 ohms


Technical specifications for 5.8GHz gain grid antenna:
- Due to rib construction of the reflector, it is resistant to even strong gusts of wind.
- High gain of the antenna makes it a good tool for long-distance wireless links.
- It may be used in horizontal or vertical polarization.
- Gain [dBi]: 28
- Frequency Range [MHz]: 5400-5800
- VSWR: 1.5
- Polarization: Vertical. horizontal
- Horizontal Beamwidth E [Deg]: 4
- Vertical Beamwidth H [Deg]: 5
- Front/Back Ratio [dB]: >25
- Impedance [ohm]: 50
- Connector: N female
- Dimensions [cm]: 91 x 72
- Bracket: Included, for 20-40 mm mast
- Weight [kg]: 5